FJ Parts

Eyestrap, Looped Allen Part # A4035

Bow Chainplate. Made of aluminum, hard anodized charcoal grey. Three countersunk mounting holes for 1/4" flat head fasteners. Three 1/4" through holes for painter, forestay, and jib tack. Zim Applications C420, Collegiate FJ, Megabyte     LP...

The 4:1 boomvang for the 420/FJ allows control of the sail shape and twist in the sail LP Part # 90605

Mesh bag perfect for storing your wet spinnaker or any other wet gear that needs to dry.   ***THIS IS NOT THE BAG FOR MOUNTING TO THE BOAT. THIS IS ONLY FOR STORAGE OFF THE BOAT, TO PREVENT MILDEW FROM FORMING ON WET CLOTH***   For the...

Tapers from 38mm to 25mm at each end for maximum stiffness in the area of maximum load, but minimum overall weight. Pole has a center eyestrap and is setup for jaws-down use. Zim Applications C420, Club FJ   LP Part # 17675

Aluminum back up bar for the shroud chainplate under the rail  LP Part # 91013

Boom Gasket LP Part # 90467

The Gooseneck Assembly for the Zim 420 and FJ includes the universal joint, the clevis pin, and the hardware for mounting the assembly to the boom.   LP Part # 90490

Gooseneck Bracket LP Part # 90491

C420/CFJ Gooseneck U Bracket LP Part # 91052

Hounds Assembly 420/FJ LP Part # 90510

C420/CFJ Hounds bracket LP Part # 90420

Main halyard ring 5mm x 25mm, stainless steel  LP Part # 90568

Sheave used at the top of the Mast for the Main Halyard   LP Part # 90578

Our mainsheet bridle with single adjustment finger trap is for use with the Club 420 or Club FJ. A rigging ball is used on the end of the bridle to prevent accidentally pulling the tail through. Block is attached and centered using a larks head knot...

Strong and durable casting, that gives you a smooth mainsail hoist every time.  LP Part # 90549

 Strong and durable casting for the heel of your C420/CFJ mast. LP Part # 90559

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"

Lower pintle for 4 hole mount 420s and FJs. Compatible with some other builders' boats. 

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"

Upper pintle for 4 hole mount 420s and FJs. Compatible with some other builders' boats. 

Sold by the foot. Our 420s use 33ft  Our FJs use 33ft

Rudder Blade Bushing LP Part # 85012

Machined aluminum rudder gudgeon. Bronze bushing pressed in pintle hole. Works in both our rudder head and the old style Vanguard.  LP Part # 85060

Rudder Gudgeon Bushing LP Part # 85265

Rudder head, also compatible with some other builders' boats and tillers. Zim Applications C420 FJ (collegiate, over-the transom-style rudder)  Includes 2:1 rudder downhaul, pivot bolt, and rudder leash.   LP Part # 85133

Rudder head spacers, 1/4" through bolt version.  LP Part # 85165

Rudder Pivot Bolt Bushing for the FJ and 420. It might be white inside your rudder blade, but this black one will work. Might have to cut down a bit if too long. 

Stainless rudder retaner clip with molded plastic end. Easier on the fingers. Zim Applications C420, FJ  

Replacement side plate for Zim rudder heads  Hole pattern updated in fall 2021. Works with old rudder style. When replacing your rudderhead, order two new side plates to ensure the hole pattern lines up.     Zim Applications  ...

1/4" bottom pin, 3/16" upper pins and 3/16" adjustment increment shroud adjuster.  LP Part # 90583

Club/School version of our spinnaker pole. Our version is non-tapered and floating. Perfect for practice or program use. 

Spreader Bracket for C420, CFJ - does not include pins that are in the image.  LP Part # 90003

One pair of spreaders. Includes tip with its pin and ring ding.  LP Part # 90018

Tips for 420/FJ Spreaders to secure the side stay

Tang C420/CFJ LP Part # 90586

Tennis ball style bailer. Shock cord has an 'S' hook crimped on for easy installation. Could be a Penn, Wilson, or Dunlop! LP Part # 91024

Comes with the tube, ends, wedge and rudder downhaul cleat. Everything but the extension. Fits both Zim 420's and Zim CFJ over the transom tiller rudder heads. LP Part # 85207

Comes with the tube, ends, wedge and rudder downhaul cleat. Everything but the extension. Fits Vanguard and PS2000 rudder heads.  LP Part # 85207

Club 420 tiller complete with downhaul cleat and 36" extension. Fits PS2000, Vanguard and LP 420's.       

420 / FJ Tiller With 33" Extension LP Part # 85298

Club 420 tiller complete with downhaul cleat and 36" extension. Fits some other manufacturer's boats in addition to Zim Club 420s.      

Tiller used for both C420 and FJ  33 inch extension  Horn Cleat attatched to bottom

5mm topping lift hook, built smaller and lighter for racing performance.  LP Part # 90509

Vang bail bolted through the mast. Made of stainless steel round bar.  LP Part # 90406

The wire lanyard features plastic covered stainless wire with loops on either end. Great for holding tack fast pins on either the main or the jib of your 420 or FJ. A great option to avoid pins being lost during rigging. 

Club 420 / CFJ boom. Complete with gooseneck, vang and mainsheet bales, Harken mainsheet blocks, top mounted Harken cheek outhaul block, outhaul line, outhaul cleat and forward lead block to pull outhaul line through cleat.   LP Part # 17650

Includes the mast, all mounted hardware, shrouds, adjusters, halyards, etc. Ready to step in the boat and sail.

Mast, CFJ CAL SCV, complete LP Part # 18600

Mast, FJ SCV, unrigged LP Part # 89039

CFJ Centerboard 

A side entry cleat which is quick, efficient and simple to use. LP Part # 91064

Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed.

A neat, compact alloy cleat. Manufactured from aluminium for light weight and durable performance.   Zim Applications C420: centerboard uphaul/downhaul, vang 2:1, topping lift CFJ: centerboard uphaul/downhaul, topping lift Megabyte: outhaul, vang,...

This 10 pack of 1/4" x 1" stainless clevis pins comes with stainless split rings. These pins are used with the Zim C420 and on a number of small sailboats.  

Clevis pin, 1/4" x 3/4" LP Part # 90010

10 pack with  rings.

This 10 pack of 3/16"x 1" stainless clevis pins comes with stainless split rings. These pins are used on the Zim C420 and a number of other small sailboats.  

Clevis pin, 3/16" x 3/4" LP Part # 90445

Beckson drain plug assembly.    LP Part # 91085

Replacement Ronstan drain plug only, no housing.

Replacement bayonet style plug only, no housing.

Uses a 3/16" x 1" Pin (Included). Hounds / Jib Shackle

 This sling style Dolly features eyelets on sling and handle fittings for securing your boat during storage or to prevent slipping on steep ramps. This dolly breaks down without tools using snap buttoms and wing nuts, and features plastic protection...

 This sling style Dolly features eyelets on sling and handle fittings for securing your boat during storage or to prevent slipping on steep ramps. This dolly breaks down without tools using snap buttoms and wing nuts, and has only one centerline...

Fast Pin, 1/4" x 0.8" LP Part # 91166

Fits Zim 420 and FJ shroud adjusters.  

Complete rudder for the FJ and the 420E. This is for over transom-style boats. (lines includes). This rudder is not for club 420s. 

Complete Harken 4:1 vang system. Even includes the shackles at both ends. 

FJ Middle / Bottom Batten

The Top Batten for the CFJ main sail is used with class legal sails from North Sails. This batten is for the adjustable top batten that is held in with velcro, not the top battens that are stitched in.    LP Part # 95875

Complete replacement batten set for the Zim CFJ. LP Part # 95861

Flying Junior Bottom Cover ~ Ideal for transporting or storing an FJ on the deck.~ Reinforced for all deck hardware at the stern as well as heavy duty webbing loops to allow the cover to be laced super taut for flap free highway travel.~ Daily use of the...

Protect your FJ with a Zim molded bow bumper. This bumper is designed to prevent damage to your hull in the invent of a bump or collision. Great for collegiate, high school, camps, and other institutional programs that want to protect their fleets. ...

FJ Bow Chainplate

FJ Centerboard Bushing

FJ Centerboard Pivot Plate LP Part # 85297

Rubber stopper for top of CFJ centerboard, two per board.  LP Part # 85023

CFJ forestay for non west coast boats.   LP Part # 90206

CFJ forestay for west coast, CFJ Class, boats. Image shown is not correct. This forestay has a swage at one end and a nico thimble at the other. Length is 13' 5.5" bearing point to bearing point.  LP Part # 90207

Aluminum gasket retainer, needs two per boat.  This gasket retainer is 39" long, and 1/2" wide.  LP Part # 85014

The aftmost piece of the gasket retainer for the Zim Club FJ. Works opposite the front gasket retainer, and in conjunction with the side gasket retainers. 

The front gasket retainer for the Zim CFJ, works in conjunction with 2 side retainers and 1 aft retainer. 

FJ Molded Gasket Retainer

The gasket retainer side piece for the Zim CFJ sailboat holds the mylar gasket in place. To replace both sides you need to order two. Front and aft retainers are sold separately.  

Slot strip gasket set, laminated woven polyester on a rigid nylon backing.   This is two gaskets, they're each 39" long, and 1 3/3" wide.  Also comes with a small strip to install at the front of the centerboard casing.  LP Part # 85049

CFJ Sailcloth Gasket Set. The sail cloth gasket set is a more durable option for institutional sailing as opposed to individual racing.  This includes two gasket set pieces, each 39 3/8" long, and 2" wide.   

28" hiking strap, black webbing with a pad underneath for comfort when hiking hard. Sold as a single strap, add 2 to cart for a pair. Zim Applications CFJ : Aft straps Byte Megabyte : Forward/Aft straps   LP Part # 91135

36" hiking strap, black webbing with a pad underneath for comfort when hiking hard.  Sold as single straps, add 2 to cart for a pair. Zim Applications CFJ: Forward hiking strap   LP Part # 91136

28" Webbed Hiking Strap

36" Webbed Hiking Strap

Harken Jib Track use for adjusting the position of jib sheeting blocks. It's compatible with Zim part number 20331 "Harken Jib Car Track" and most blocks and jib sheeting hardware Harken Part # 450

CFJ Jib Car

CFJ jib halyard, 3/32" wire with becket block nico pressed on one and and a snap shackle on the other. Halyard tail is 4mm line with Dyneema core for very low stretch.  LP Part # 90503

 Jib, manufactured by North Sails. Does not include a sail bag. Jib sheets sold separately. LP Part # 94501

Harken Jib Car Track compatible with Zim part number 20332 "Harken Jib Car" - mounted to the deck tank of the FJ sailboat Harken Part # 453.12

Jib Track End CFJ

Ronstan slider car with spring-loaded plunger pin for fast, positive positioning.  Zim Applications Hiking strap track: Megabyte CFJ: Jib car track (older model boats)     

The CFJ mainsail is a dacron class legal sail manufactured by North Sails. The FJ Main comes complete with sail ties, battens, and a class button, and sail bag.  Zim Sailing now offers FREE NUMBERS and FREE NUMBER INSTALLATION on all sails purchased...

FJ Mast Step LP Part # 90540