Parts

Zim 420 centerboards have a seamless edge that makes for a beautifully finished product that is as smooth as possible through the water. Smoke grey centerboards are provided standard with Zim 420s. Also available in white gelcoat.

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"

Lower pintle for 4 hole mount 420s and FJs. Compatible with some other builders' boats. 

These 12" digital sail numbers have a sticky adhesive on one side that will bind them to the sail. Once applied and set, the numbers will be able to withstand the elements of sailing without falling off. If you need to change your numbers for any reason...

The SL training sails can be used on the Optimist or Pram. The luff has been shortened to raise the boom height. Battens have been eliminated for easy storage. This is meant to lessen head injuries and allow for 2 sailors in the boat. Additionally, it...

Class approved spinnaker sail for FJ sailboats, made by North Sails. Updated Dark Blue with Light Blue colorway. Class Legal Made by North Sails Zim Part # 20337 / Laser Performance Part # 94502 Compatible with both Zim and Laser Performance boats

12" Sail Numbers & Letters 

9" Sail Numbers

Includes the mast, all mounted hardware, shrouds, adjusters, halyards, etc. Ready to step in the boat and sail.

Unrigged Mast for SCV (School Collegiate Version) 420.  Includes Spar and all harware installed, excluding lines and rigging (SCV mast do not have trapeze or spinnaker hardware)  LP Part # 18601

Unrigged: Includes the spar, mast hardware, and the spreaders. Does not include any standing or running rigging.  **Ships in 1-2 Days. Shipping is not calculated online for this item, We will provide you the delivery cost prior to shipping for your...

29er Main Sail Batten 4

29er Main Sail Batten 3

29er Main Sail Batten 2

29er Main Sail Batten 1

29er Mast Track (mid section)

29er Trapeze Tang

 The 29er rudder stock with tiller works with all 29er rudder blades, and includes a tiller without the extension. 

Locking Pins with a quick release ball at the end. 5mm pins will sometimes fit 3/16" recievers, and will loosely fit 1/4" recievers - It is recommended that you use a part that specifically fits your reciever.

29er Trapeze Cleat, fully assembled - Includes trapeze ring (with integrated block), trapeze clam cleat, donut handle, control line, and rigging line.

29er Trapeeze Handle

29er Shroud w/ Bwave Turnbuckle.  Sold individually, if you need a pair, order two.

29er GNAV Felt (ft.)

29er Bow Drain Plug (Old Style)

29er Rudder (FRP)

29er daggerboard constructed with fiberglass. 29er Class approved daggerboard.  *Large Item shipping prices may vary*

29er Jib track end stop fits Harken tracks only Harken Part # 2706

The high-strength composite T2™ is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 can be tied,...

Harken® ball bearing traveler cars with multipart purchases allow easy adjustment of loaded sails from the cockpit.  Harken Part # 2703

29er Jib Track Harken Part # HC10650

29er Trapeze Wire, Sold individually and not as a set (All componetry shown in the picture is included with purchase)  

29er Jib Track Split Ring

29er Trapeze Shackle

29er Pintle Pin

The fine tune stay adjuster provides for a quick and easy way to adjust stay tensions. It greatly reduces the risk of losing the stay when adjusting rig tension. 316 stainless steel Pin - 3/16 inch Increment Length - 5/32 in. Qty. Adjustment Settings -...

Main and Jib Halyard set for the 29er

29er Spinnaker Halyard

 Batten adjuster for the 29er and Byte CII Main

 Replacement hanks for the 29er jib.

 Batten set for the 29er Jib sail

 Boom vang strut pin replacement for the 29er.

 Compression tube for the 29er hounds

 Compression Tube for the 29er Trapeze

29er Vang Tube   Tube ONLY

Replacement throat for the 29er

 Replacement lower gudgeon for the 29er

 Replacement lower gudgeon for the 29er

 The 29er deck cover is designed to cover the entire boat with  the mast up.

 Aluminum tiller for the 29er.

 Aluminum daggerboard for the 29er skiff. 

 Gooseneck fitting for the 29er boom

 Gooseneck fitting for the 29er mast

Mast sheave for the 29er 

29er Boat Bender

 Forestay for the 29er skiff.  Looking for parts for your 29er that you don't see here? Call us 401-237-6117

 Single replacement shroud for the 29er 

 Replacement tube end fitting that mounts on the mast for the 29er boom vang.

 Replacement end that mounts on the boom for the 29er vang tube.

 The 29er Vang Shoe is the receiver for the end of the boom vang that mounts on the boom.

 Replacement boom vang tube with ends for the 29er

 Aluminum track for the 29er mast.

 Spreader tip replacement for the 29er

 Spreader mounting bracket for the 29er skiff

 Replacement end plug for the 29er sprit pole. 

 Mast step for the 29er skiff

 Base fitting for the 29er mast, also known as the mast heel plug.

 The 29er Mast bag is designed with a full length zipper and is padded for extra protection

 A complete batten set for the 29er Mainsail.

 The 29er Hull Cover from Zim Sailing is designed to cover the bottom of the boat during travel and storage. The cover is designed to be used with or without the rig in the boat. 

 The 29er Hiking Straps are padded for comfort while hiking and sold in a pair. 

 The 29er Foil Bag is designed to hold the rudder blade and daggerboard. It is padded and built tough to protect your blades and everything around them during storage and travel. The 29er Foil Bag also has an exterior retainer for your tiller.

Double Block w/ Hook

 The 29er boom bag has a full length zipper and is designed to protect the boom during travel and storage. 

 The 29er Spinnaker Sock is fabricated with a Mylar top and a mesh bottom for water drainage. It is designed to contain the spinnaker when retracted. 

 Class legal 29er Spinnaker from MacDiarmid Sails.   

  Class legal jib sail from MacDiarmid for the 29er.

 The 29er Mainsail is a fully battened Mylar class legal 29er sail from MacDiarmid. The 29er mainsail comes complete with tell tales, battens, batten adjusters, and a long sail bag.  Zim Sailing now offers FREE NUMBERS and FREE...

The 420 Bunk Dolly is the best available way to store and transport your boat. The dolly has a fiberglass bunk and thick padding to better protect and support the hull of your boat. Tired of your boat slipping while you're...

Opti/Pram Dolly, Dynamic Dollies

Very similar to the standard RS Feva Dolly, the double centerline tube dolly allows for the bowsprit to extend for unhindered launching and dousing of the asymmetric spinnaker on land. The tube and sling lengths are specific to the Feva for balanced...

 This sling style Dolly features eyelets on sling and handle fittings for securing your boat during storage or to prevent slipping on steep ramps. This dolly breaks down without tools using snap buttoms and wing nuts, and features plastic protection...

 This sling style Dolly features eyelets on sling and handle fittings for securing your boat during storage or to prevent slipping on steep ramps. This dolly breaks down without tools using snap buttoms and wing nuts, and features plastic protection...

The RS Quest Dolly is a sling style dolly from Dynamic Dollies that is designed specifically for the RS Quest to ensure proper balance and easy maneuvering. The RS Quest Dolly also features a split bow tube allowing for the bowsprit to extend while the...

  This sling style Dolly features eyelets on sling and handle fittings for securing your boat during storage or to prevent slipping on steep ramps. This dolly breaks down without tools using snap buttoms and wing nuts, and has only one centerline...

Opti Land Trainer.    DOES NOT INCLUDE BOAT, LAND TRAINER ONLY**

Another great dolly from Dynamic, the RS Feva Dolly has a split bow tube allowing for the bowsprit to extend for unhindered launching and dousing of the asymmetric spinnaker on land. The tube and sling lengths are specific to the Feva for balanced load...

RS Aero Dolly, Dynamic Dollies

Dynamic dolly for your ILCA sailboat.

 This sling style Dolly features eyelets on sling and handle fittings for securing your boat during storage or to prevent slipping on steep ramps. This dolly breaks down without tools using snap buttoms and wing nuts, and has only one centerline...

The RS Tera dolly is a sling style dolly from Dynamic that is fabricated specifically for the Tera to ensure proper balance point for easy maneuvering. The centerline tube can be seperated without tools for travel and storage, and the sling and handle...

The Practic 420 Dolly is the perfect solution for 420 sailors who travel a lot. It is light wieght, and push button assembly makes for easy break down with no tools needed. The dolly is fabricated using durable welded aluminum construction, and the...

Our large solid dolly wheel is a great alternative to the air wheel for a more durable and lower maintenance option. This wheel is a foam tire with a plastic hub. The dimensions of this wheel is: 15" x 3"  This wheel fits a 1" wheel shaft and does...

Sail Cuff

Megabyte Mylar Sail Batten Set

Megabyte Batten 5

Megabyte Batten 4

Megabyte Batten 3

Megabyte Batten 2

Megabyte Batten 1

Upper gudgeon for the Megabyte.