Parts

 Stainless steel bailer guard for the Super Shute 90 auto-bailer. Protects plastic bailer from being stepped on and broken. 

 The 23" hiking strap from Zim is used in the Megabyte for the middle set of hiking staps. It features 2" black webbing with padding underneath for added comfort. The stap is sold as a single, and 2 must be added to the cart for a pair. 

Plug end MKI Upper

Megabyte Tiller Allen Part # AB1037-1

Mast Step Stud

Lower mast base for the megabyte. This fitting is compatible for the latest version of the megabyte mast. Please contact us if you need this part for an older version of the mast.  

Locknut for the megabyte mast step assembly. This piece is custom-machined with channels and holes to allow for self draining.  

Mast Step Plate

.22m Track

Hiking strap plate for your ILCA sailboat. LP Part # 91168

Eyestrap

Gooseneck Boom End

SS60 Gasket Thick

SS60 Gasket Thin

Byte CI Mylar Sail

Stopper ball for 5-6mm line.

Stopper ball for 5-6mm line.

The SHeaveless blOCK! The shock is the obvious choice for control line deflections and purchase systems that require a lightweight high load capacity block. Several attachment options, including webbing, pigtail, lashing and dyneema links.    

Gasket, Inner, Bailer, SS60

Flap, Bailer, SS60

Latch, Bailer, SS60

Chute, Bailer, SS60

Clip, Bailer, SS60

Pin, Bailer, SS60

Byte CII Batten 6

Byte CII Batten 5

Byte CII Batten 4

Byte CII Batten 3

Byte CII Batten 2

Byte CII Batten 1

Lower Plug (aluminum rig)

Byte foil bag for Byte CII and Byte sailboats. Keep your blades and accessories protected and in one place. Zipper closure on end, divided pockets inside; one for daggerboard, one for rudder & tiller. Also has a convenient carrying shoulder strap...

Byte CII Spar Bag

Byte CII Batten Set, Mylar Sail

Masthead sheave housing for the Byte CII upper section. A single piece is machined for a durable housing that can withstand the high loads on the CII's halyard. Sheave sold separately, accepts a 1/4" x 1-1/4" clevis pin. Allen Part # A..94

An elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth.  Allen Part # C222A

Curved vang key for your ILCA sailboat. Also used on the Byte and Megabyte. LP Part # 90664

 Precision moulded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction.Can be fitted with a shackle in either of two planes to allow correct alignment of the block. Zim Applications ...

Complete aluminum lower mast section for the standard Byte rig. This mast is used with the original dacron sail. Includes all mounted hardware and fittings already installed. 

Precision moulded Acetal sheaves running on stainless steel or Torlon® ball bearings provide high performance & low friction. This block has a low profile swiveling hook for quick and easy attachment. Stainless steel ball bearings UV stabilised...

Plug for the gooseneck end of the boom on the ILCA and Byte.

Boom fairlead for the ILCA sailboat.

Vang tang for the ILCA sailboat. Also used on the Byte and Megabyte. Allen Part # AB1632

Gooseneck for your ILCA sailboat. Also works with the Byte and Megabyte.

Base plug for the Byte CII lower mast. Secures in the bottom of the mast tube with a self-tapping screw. Durable, chafe-resistant high grade plastic is machined to form a single piece. Stands up to years of wear and tear in the mast cavity.  

The connector sleeve for the standard Byte upper mast and the ILCA upper mast. This is the connecting joint between the upper and lower sections.

Connector plug for the ILCA lower and upper. Also works for the byte.

End plug for the ILCA upper and also works on the outboard end of the ILCA boom. Also works for the Byte. LP Part # 90660

Class legal fiberglass daggerboard for the Byte. Sanded and polished for a sleek and fast finish. Comes rigged with a rope handle and bumpers.  

Rubber stopper for the daggerboard, through-bolts in place. Need two per board.      

Horn cleat for the old style ILCA tilller and Byte tiller.

Tiller End Cap

Class legal rudderhead for the ILCA sailboat. LP Part # 85135

Grabrail for your ILCA sailboat. Now comes in three pieces that snap together before installation. Also works for the Byte and Megabyte. LP Part # 91307

Used to replace carpet on rudderheads and centerbords for a variety of boats.  Notes: The RS Aero daggerboard trunk can use this carpet set, you need 2 feet, and then you need to slice it in half (1" to 1/2")

Durable, lightweight I-Beam Ronstan traveller track with countersunk fastener holes. Track is supplied with insulating inserts to eliminate corrosion between track and fasteners Black anodized aluminum alloy Zim Applications Byte, Megabyte  ...

Gudgeon for your ILCA sailboat. Also works on the Byte. LP Part # 85051

The IYE Super Shute is a lightweight yet robust bailer which offers quick drainage with ease of operation. Manufactured from tough salt-water resistant nylon and ABS plastic, each bailer is boxed with stainless steel fixing nuts, bolts, packing washers,...

A very strong alloy clamcleat. Zim Applications Sail control cleats : Byte/Megabyte   LP Part # 91327

This swivel block is used for the turning block on the mast and deck for Byte and Megabyte control lines. Stainless steel ball bearings UV stabilised Acetal sheave Grade 316 stainless steel load strap and head fitting Impact and UV resistant,...

Deck plate, installs under the fairlead at the mast base for attaching sail control swivel blocks.  

Bow eye for your ILCA sailboat. Also used on the Byte and Megabyte. Allen Part # A.134 LP Part # 91049

The long C420 Shroud Adjuster Cover is designed for use with Zim Sailing's C420 shroud link plates. Sold individually. 

Cotter pin, 3/32" x 3/4"

The C420 Link Plate is designed by Zim Sailing for use on our Club 420 and ZForce 420 sailboats. The captive design allows you to adjust your rig without fear of the rig crashing down, increasing safety and performance. The primary benefit to our link...

The high-strength composite T2™ is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. Harken Part # 2149

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Harken Part # 2644

Tiller extension, 42" All extensions include universal joint and base for mounting on existing tillers. The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel of the helm. The simple...

Block, 40mm Autoratchet

Eyestrap, Micro Allen Part # H4388

The high-strength composite T2™ is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 can be tied,...

Weld Nut, 1/4-20

Large Button Fairlead Allen Part # A4539

Large Cam Cleat Fairlead Harken Part # 425B

23mm fairlead for the traveler on your ILCA sailboat. LP Part # 91321

Allen 20mm dynamic block. Length: 37mm Line diameter: 2.5-6mm Breaking load: 540kg Maximum dynamic load:115kg Weight: 11.1g Allen Part # A2020 LP Part # 91042

WORKING LOAD 280 LBS BRAKING LOAD 850 LBS LINE UP TO 6 MM WEIGHT 0.8 OZ SHEAVE 20 MM

Cam Cleat Fairlead Kit Harken Part # 499

Shroud Back Up Plate

CFJ Class Aluminum Tiller (No Extension) LP Part # 85212

Zim Sailing has developed a new aluminum tiller for Cal Style CFJ sailboats that is now class approved! The plastic wedge makes our CFJ tiller compatible with a wide range of rudder heads for CFJs from different builders and different years. Say goodbye...

FJ Shroud (LP)

Gooseneck Pin

Jib Track End CFJ

Ronstan Jib Track

CFJ Jib Car

Clevis Pin, 6mm x 52mm

A bag of 10 stainless steel ring dings useful for all small clevis pins. 

Clevis Pin, 4mm x 16mm

In competitive sailing, being able to react quickly to wind shifts can make all the difference. The Wireless Micro Compass from Raymarine delivers precise compass readings accurate to 1 degree in a small waterproof solar powered package. Easily viewed...

Boom Gasket LP Part # 90467

420E Hiking Strap. Webbed hiking strap that will also work on Club 420s.

36" Webbed Hiking Strap

28" Webbed Hiking Strap

Selden Boom Clamp Plate

Selden Boom Eyestrap

Gooseneck pin that fits into your boom 

Stainless steel end mount for the C420 traveller bar. Accepts a 1/4" pin.

CFJ Centerboard 

LP Shroud Adjuster