Parts

Shackle 5MM D

Low-friction Carbo Air blocks are lightweight, strong, reliable—and affordable. Companions to the popular Harken Black Magic block line, these small, compact blocks have very high working loads for safe, easy trimming. Harken Part # 352

Our 420 top cover is urethane coated polyester and designed to be used with the mast up. The 420 cover does not go over the boom, but does have tabs for tenting the cover using your main halyard.  LP Part # 87206

CFJ Sailcloth Gasket Set. The sail cloth gasket set is a more durable option for institutional sailing as opposed to individual racing.  This includes two gasket set pieces, each 39 3/8" long, and 2" wide.   

The Top Batten for the CFJ main sail is used with class legal sails from North Sails. This batten is for the adjustable top batten that is held in with velcro, not the top battens that are stitched in.    LP Part # 95875

The Gooseneck Assembly for the Zim 420 and FJ includes the universal joint, the clevis pin, and the hardware for mounting the assembly to the boom.   LP Part # 90490

The 20mm stand up block is now standard in the Zim C420 as a lead for the boom vang control line. It makes a great upgrade from the former fairlead and can be used for a number of other applications as well.   

This 10 pack of 3/16"x 1" stainless clevis pins comes with stainless split rings. These pins are used on the Zim C420 and a number of other small sailboats.  

This 10 pack of 1/4" x 1" stainless clevis pins comes with stainless split rings. These pins are used with the Zim C420 and on a number of small sailboats.  

This spinnaker pole end fits a pole with a 1" inside diameter.  

Dacron/Sailcloth Gasket for 420 Centerboard  Comes with two peices that are each 47" long and 1 1/4" wide.  LP Part # 85045

Complete replacement batten set for the Zim CFJ. LP Part # 95861

420 / FJ Tiller With 33" Extension LP Part # 85298

Gooseneck Universal for Selden Booms on Selden Masts. This will not fit on Dwyer Booms or Dwyer Masts. If you have a Selden Boom w/ Dwyer Mast, buy THIS UNIVERSAL. If you have a Dwyer Boom w/ Dwyer Mast, buy THIS UNIVERSAL.

Harken Jib Track use for adjusting the position of jib sheeting blocks. It's compatible with Zim part number 20331 "Harken Jib Car Track" and most blocks and jib sheeting hardware Harken Part # 450

Harken Jib Car Track compatible with Zim part number 20332 "Harken Jib Car" - mounted to the deck tank of the FJ sailboat Harken Part # 453.12

Tips for 420/FJ Spreaders to secure the side stay

C420 Boom, Selden

FJ Middle / Bottom Batten

Gooseneck Molding for the Selden C420 Boom. 

FJ transom Bar w/ Wider Holes

FJ Mast Step LP Part # 90540

Super Mini Bailer Gaurd

Black mesh spinnaker bag for the Club 420 and Club FJ. Wide opening with support shockcord for easy dousing and launching. Also has a velcro pocket for all your storage needs on race day.   LP Part # 95800

10 pack with  rings.

Stainless rudder retaner clip with molded plastic end. Easier on the fingers. Zim Applications C420, FJ  

Sail Bag (Opti / Jib) This bag is 82" long

The 4:1 boomvang for the 420/FJ allows control of the sail shape and twist in the sail LP Part # 90605

FJ Bow Chainplate

Compact blocks have very high working loads for safe, easy trimming. Harken Part # 350

Horn Cleat LP Part # 91107

75mm Rachet Block Harken Part # 2670 LP Part # 91283

Super Mini Bailer Handle

Our mainsheet bridle with single adjustment finger trap is for use with the Club 420 or Club FJ. A rigging ball is used on the end of the bridle to prevent accidentally pulling the tail through.  Works with LP and Zim boats after 2016 This product...

Sail bag for a 420 Mainsail  LP Part # 95807

Complete set of replacement battens for the Zim C420.  

Selden Gooseneck Pin

8 pairs of yarn tell tales with adhesive patches. Includes instructions on proper placement and installation. Great for multiple types of boats including the C420, FJ, ILCA, Optimist, etc.  Optiparts Part # EX1430

Centerboard Pivot Bolt Assembly for C420 LP Part # 85016

Fast Pin, 1/4" x 1 1/2" LP Part # 90659

Grade 316 stainless 5mm twist shackle. Zim Application Vang (boom & mast end): Byte, Megabyte  

Gooseneck Bracket LP Part # 90491

C420 Bottom Batten

Middle and Bottom Batten for a C420, it measures 25.5"

Sheave used at the top of the Mast for the Main Halyard   LP Part # 90578

Protect your 420 with a Zim molded bow bumper. This bumper is designed to prevent damage to your hull in the invent of a bump or collision. Great for collegiate, high school, camps, and other institutional programs that want to protect their fleets. ...

C420/CFJ Hounds bracket LP Part # 90420

CFJ forestay for non west coast boats.   LP Part # 90206

Rubber Cork Drain Plug  LP Part # 91089

Gooseneck Universal for Selden Booms on Dwyer Masts. If you have a Selden Boom w/ Selden Mast, buy THIS UNIVERSAL. If you have a Dwyer Boom w/ Dwyer Mast, buy THIS UNIVERSAL.

FJ Molded Gasket Retainer

Protect your FJ with a Zim molded bow bumper. This bumper is designed to prevent damage to your hull in the invent of a bump or collision. Great for collegiate, high school, camps, and other institutional programs that want to protect their fleets. ...

The aftmost piece of the gasket retainer for the Zim Club FJ. Works opposite the front gasket retainer, and in conjunction with the side gasket retainers. 

The front gasket retainer for the Zim CFJ, works in conjunction with 2 side retainers and 1 aft retainer. 

The gasket retainer side piece for the Zim CFJ sailboat holds the mylar gasket in place. To replace both sides you need to order two. Front and aft retainers are sold separately.  

Single back up rod for guy cleats, or for the guy hooks....if your boat has them.  LP Part # 91011

Aluminum back up bar for the shroud chainplate under the rail  LP Part # 91013

Eyestrap, Looped Allen Part # A4035

Tiller extension, 30" LP Part # 85192

A side entry cleat which is quick, efficient and simple to use. LP Part # 91064

Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed.

CFJ Cal JRV Rigged Rudder

Goosenect Spigot, Selden

Plastic spacer standoff used when stacking a pair of micro cheek blocks. 

Spinnaker pole ring as used on the C420 and CFJ masts. 

22mm cheek block at the base of the mast used for the spinnaker halyard and the topping lift. Order the standoff spacer (20221) separately.  Harken Part # 233A LP Part # 91338

Standard two hole eyestrap as used on the C420 cunningham, outhaul lead block, ILCA eyestrap, etc.   Harken 073 Eyestrap - 32mm Standard Eyestrap - Stainless Steel Breaking load (kg)726 kgBreaking load (lb)1600 lb Harken Part # 73

Standard replacement non skid for Club 420 sailboats. This kit includes 2 sections of 3 inch wide by 45 inch long high quality non skid material with sticky back adhesive. See our instructions below for how to install on your C420. Previous LP Part #...

Mainsheet bail bolted through the boom. Made of stainless steel.  LP Part # 90403

Vang bail bolted through the boom. Made of stainless steel.  LP Part # 90404

Vang bail bolted through the mast. Made of stainless steel round bar.  LP Part # 90406

Slot strip gasket set, laminated woven polyester on a rigid nylon backing.   This is two gaskets, they're each 39" long, and 1 3/3" wide.  Also comes with a small strip to install at the front of the centerboard casing.  LP Part # 85049

Mesh bag perfect for storing your wet spinnaker or any other wet gear that needs to dry.   ***THIS IS NOT THE BAG FOR MOUNTING TO THE BOAT. THIS IS ONLY FOR STORAGE OFF THE BOAT, TO PREVENT MILDEW FROM FORMING ON WET CLOTH***   For the...

Slot strip gasket set, laminated woven polyester on a rigid nylon backing.  Comes with two pieces that are each 46" long, 1" wide. Also comes with a small piece that you can mount at the forward part of the centerboard casing.   

Blade bag for rigged rudder and tiller. Has external pocket for sheets, etc. Both hand carry handles and shoulder strap. Velcro closure along long side.  LP Part # 87142

1/4" bottom pin, 3/16" upper pins and 3/16" adjustment increment shroud adjuster.  LP Part # 90583

C420 Jib cunningham setup allows for a range of jib tack settings

CFJ CAL-style rigged rudder. This is a complete rudder including rudder blade, rudder head, and downhaul line.  LP Part # 85151

CAL Style Rudder Head, fits both Zim and Vanguard CFJ's. Aluminum gudgeons with pressed in bronze bushings.  LP Part # 85134

Zim Sailing offers custom Club 420 spinnakers from North Sails. Chose your panel colors from the 12 different color options as seen in the product image. They can be all different colors, all the same color, or any combination of colors. Get creative and...

36" hiking strap, black webbing with a pad underneath for comfort when hiking hard.  Sold as single straps, add 2 to cart for a pair. Zim Applications CFJ: Forward hiking strap   LP Part # 91136

28" hiking strap, black webbing with a pad underneath for comfort when hiking hard. Sold as a single strap, add 2 to cart for a pair. Zim Applications CFJ : Aft straps Byte Megabyte : Forward/Aft straps   LP Part # 91135

CFJ jib halyard, 3/32" wire with becket block nico pressed on one and and a snap shackle on the other. Halyard tail is 4mm line with Dyneema core for very low stretch.  LP Part # 90503

CFJ forestay for west coast, CFJ Class, boats. Image shown is not correct. This forestay has a swage at one end and a nico thimble at the other. Length is 13' 5.5" bearing point to bearing point.  LP Part # 90207

 This replacement shroud for the CFJ can be used with either the east coast or west coast, Cal style, FJ.  LP Part # 90218

Spinnaker Pole End fits 13/16" ID LP Part # 85024

Rubber stopper for top of CFJ centerboard, two per board.  LP Part # 85023

The becket holds the end of the rope under the cleat. No need for an extra fixing. Manufactured from aluminium for a light weight and durable performance. Has a hard anodized finish to give a hard wearing surface. Zim Applications C420/CFJ:...

High quality urethane universal with molded in safety line. Used on several boats including the 420, FJ, ILCA, Optimist, Megabyte, Byte, etc.  LP Part # 85200

Stopper ball for 5-6mm line. 

Replacement spinnaker pole end, plastic molding with stainless trigger.  This is used for tapered spin poles.  LP Part # 90456

No more guy hooks! 1/4" roller pin designed to fit in ours and the Vanguard shroud adjusters. Built exclusively by Zim Sailing. 

Lightweight main halyard constructed with 3 mm dyneema with rigging ball spliced for head of sail. Reduces windage and weight aloft. 

Replacement spring for Large Harken Cam cleat.  Harken Part # MS-006

White Bayonet style drain plug assembly, 1/4 turn variety. 

Tennis ball style bailer. Shock cord has an 'S' hook crimped on for easy installation. Could be a Penn, Wilson, or Dunlop! LP Part # 91024

Super Medium Bailer Handle

Andersen automatic bailers are recognized by dinghy sailors as the most effective and reliable means of automatic bailing. The Super Medium Bailer is designed for racing dinghies where the bailer is operated from a hiking position, this bailer is mounted...

'S' hook, easy to crimp on to shockcord. 1/8" diameter LP Part # 90642

Replacement Ronstan drain plug only, no housing.