One Design Parts

ILCA Sail Bag without tube from Colie Sails.  Purchase bag alone and supply your own tube Freight charges are nominal for just the bag Cut 4" PVC tube to 111" and then sand and duct tape the ends Keep your best racing sail free of folds and...

Top Section Sleeve Made from Top Gun Material Sewn with Tenera thread Velcro enclosure Able to be personalized Protects your new top section

The key for tying spars to trailer or roof rack for regattas, vacationing or both. Makes it easy to carry all three spars around the dinghy lot. Separate compartments for 3 spars. Leave your rigging on! Room for vang! Features separate compartments for...

High quality and heavy duty is the best way to describe this top of the line Colie Deluxe bag. There are three compartments that hold the rudder, tiller and extension , and centerboard. The padding between each compartment is high density Volara®...

Bottom cover for your ILCA Sailboat was designed for a long life and ease of use. It is totally hassle free with no adjustments needed.~ For absolute flap free highway travel we have installed 7 webbing ties that allow the cover to be pulled drum tight...

The Gooseneck Assembly for the Zim 420 and FJ includes the universal joint, the clevis pin, and the hardware for mounting the assembly to the boom.   LP Part # 90490

Hounds Assembly 420/FJ LP Part # 90510

Club 420 / CFJ boom. Complete with gooseneck, vang and mainsheet bales, Harken mainsheet blocks, top mounted Harken cheek outhaul block, outhaul line, outhaul cleat and forward lead block to pull outhaul line through cleat.   LP Part # 17650

The C420 Link Plate Shroud is an exclusive product designed by Zim Sailing. The end is designed to accept our link plate, which allows you to adjust your rig while keeping the shroud captive, increasing safety and performance. This shroud can be used to...

Wire Forestay for Club 420's from LP, made from 1/8 in wire. This version is specific to LP C420s. For all Zim C420s or other C420s using the standard 3/32 in wire, please purchase C420 Forestay (Zim)

This pre-cut section of 6mm gray Dynema is made for an ILCA traveler. It is 144 inches long and has a 2 inch splice in one end. 

Replacement vang cleat base for Zim 420E sailboats. Stainless steel construction.