General Parts

Block, 30mm Standing Swivel

38mm Cam Cleat

The Selden Ball Bearing Block, BBB30, is used when loads are moderate and dynamic. The ball bearings provide low friction sheave rotation with less vibration. This style Ball Bearing Block from Selden is available in 20, 30, 40, and 60 mm sheave...

Selden lightweight Ball Bearing Blocks (BBB) are to designed to perform under moderate and dynamic loads where good sheave rotation and minimal friction are critical.The 40mm series features stainless steel ball bearings with Acetal sheaves and bearing...

30mm Single Dynamic Block from Allen.  Part # A2030 The Allen Dynamic range is generally the best choice for applications that require constant sheave movement. Bearings – Dynamic Blocks feature our patented bearing system which uses...

Tiller extension, 48" All extensions include universal joint and base for mounting on existing tillers. The rigid anodized body of this tiller extension transmits subtle boat and rudder movements, allowing you to steer by the feel of the helm. The simple...

Horn cleat used on the 420 / FJ mast. Also used on collegiate FJ / 420E tillers. LP Part # 91070

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"

Lower pintle for 4 hole mount 420s and FJs. Compatible with some other builders' boats. 

The high-strength composite T2™ is the first block with no metal shackles or rivets. It is used for traveler controls, mainsheets and vangs, cascades, bridles, and other systems where small, lightweight blocks are called for. The T2 can be tied,...

The fine tune stay adjuster provides for a quick and easy way to adjust stay tensions. It greatly reduces the risk of losing the stay when adjusting rig tension. 316 stainless steel Pin - 3/16 inch Increment Length - 5/32 in. Qty. Adjustment Settings -...

SS60 Gasket Thin