C420 / FJ Main Halyard Ring Sea-Dog $6.40 Main halyard ring 5mm x 25mm, stainless steel LP Part # 90568
C420 / FJ Topping Lift Hook Ronstan Sailboat Hardware $7.62 5mm topping lift hook, built smaller and lighter for racing performance. LP Part # 90509
Tug Handle RWO Marine $10.95 Tug handle for control lines. Fits up to a 6mm line, easily tied on with a stopper knot. This handle is great for the Opti sprit halyard and higher-load control lines on the Byte and Megabyte.
Opti Bridle Ring Stainless Zim Sailing $8.90 Ring for boom bridle to clip mainsheet pennant onto. 25mm diameter x 3mm thick wire.
Clevis Pin - 1/4" x 1/2" (Harken ILCA Vang Base Tang Pin) Zim Sailing $2.75 Stainless steel clevis pin - 1/4" x 1/2" with 3/8" grip length. Commonly used for the ILCA Harken Vang Lower Base Unit vang tang pin (to connect the vang lower unit to the tang on the lower mast section).
Clevis Pin, 3/16" x 1/2" $4.50 Used for the C420, 420E, and FJ Spreader Tips. Image shown to reflect present elements, size and appearance should not be used in place of measurements LP Part # 91077
Clevis Pin, 3/16" x 1" $5.30 Image shown to reflect present elements, size and appearance should not be used in place of measurements
Clevis Pin, 1/4" x 1 1/4" $6.00 Image shown to reflect present elements, size and appearance should not be used in place of measurements LP Part # 91075
Clevis Pin, 1/4" x 1" $6.00 Image shown to reflect present elements, size and appearance should not be used in place of measurements LP Part # 91074
