C420 Spinnaker Guy Large Roller Pin (1/4 inch) *New Spec* ZIM $31.00 Updated C420 spinnaker guy larger roller pin (1/4 inch) in our latest spec. The outboard end of the pin features a 1 inch disc that's better for holding your spin sheets as compared to our previous version. A great upgrade for any C420 sailor! Guy...
Clevis Pin, 3/16" x 1/2" $3.70 Image shown to reflect present elements, size and appearance should not be used in place of measurements LP Part # 91077
Clevis Pin, 3/16" x 1" $4.35 Image shown to reflect present elements, size and appearance should not be used in place of measurements
Clevis Pin, 1/4" x 1 1/4" $4.95 Image shown to reflect present elements, size and appearance should not be used in place of measurements LP Part # 91075
Clevis Pin, 1/4" x 1" $4.95 Image shown to reflect present elements, size and appearance should not be used in place of measurements LP Part # 91074
Clew Strap North Sails $31.00 Clew strap that's used on the ILCA and other similar boats. It holds the clew of the sail to the boom while allowing the sail to slide as you adjust your outhaul. This clew strap features velcro closure with easy adjustment. LP Part # 91078
Low Friction Ring, 8 x 18mm Harken $15.95 Rings are Hard Lube-anodized 6061-T6 aluminum for a smooth, slippery surface, and with no moving parts, wear is minimal Harken Part # 3269
Fast Pin, 5x18mm $19.00 Locking Pins with a quick release ball at the end. 5mm pins will sometimes fit 3/16" recievers, and will loosely fit 1/4" recievers - It is recommended that you use a part that specifically fits your reciever.
Ring Ding, Bag of 10 ZIM $12.00 A bag of 10 stainless steel ring dings useful for all small clevis pins.
Clevis Pin - 3/16 in x 1 in (10 Pack) ZIM $33.00 This 10 pack of 3/16"x 1" stainless clevis pins comes with stainless split rings. These pins are used on the Zim C420 and a number of other small sailboats.
Clevis Pin - 1/4 in x 1 in (10 Pack) ZIM $41.00 This 10 pack of 1/4" x 1" stainless clevis pins comes with stainless split rings. These pins are used with the Zim C420 and on a number of small sailboats.
Spinnaker Pole Ring Ronstan Sailboat Hardware $54.63 Spinnaker pole ring as used on the C420 and CFJ masts.
C420/FJ Main Halyard Ring Sea-Dog $5.25 Main halyard ring 5mm x 25mm, stainless steel LP Part # 90568
C420/FJ Topping Lift Hook Ronstan Sailboat Hardware $7.40 5mm topping lift hook, built smaller and lighter for racing performance. LP Part # 90509
Harken Stand Up Spring Harken $3.67 Spring to make the ratchet block stay standing up. Helps reduce mainsheet snags. Works on ILCA, SF, Optimist, 420, and many other small sailboats. 2" X 7/8" Harken Part # 71.1 LP Part # 91217
Clevis Pin - 1/4 in x 3/4 in $4.35 Clevis pin, 1/4" x 3/4" LP Part # 90010 Used for the Zim C420 and FJ Bow Chainplate. Also the Dwyer C420 and FJ Gooseneck
Guy Hook - Pad Mount Ronstan Sailboat Hardware $22.89 Pad mount guy hook used on some other manufacturers' Club 420s. stainless steel hook neoprene pad LP Part # 91119
Gooseneck Fast Pin with Lanyard (3/8 inch) $32.00 Stainless Steel Fast Pin for Club 420, FJ, and V-15 Gooseneck assembly. Includes a 3/8 inch stainless fast pin with wire lanyard so you can secure your Gooseneck safely. Fast Pin + Wire Lanyard Secures Gooseneck Assembly Works on most Club 420, FJ, and...
Tug Handle RWO Marine $9.45 Tug handle for control lines. Fits up to a 6mm line, easily tied on with a stopper knot. This handle is great for the Opti sprit halyard and higher-load control lines on the Byte and Megabyte.
Opti Bridle Ring Stainless ZIM $7.35 Ring for boom bridle to clip mainsheet pennant onto. 25mm diameter x 3mm thick wire.