Zim Sailing

Updated C420 spinnaker guy larger roller pin (1/4 inch) in our latest spec. The outboard end of the pin features a 1 inch disc that's better for holding your spin sheets as compared to our previous...

Grey gelcoat in 8oz container for your next boat repair. Used by Zim Sailing for: Zim FJ/CFJ Deck Zim ISCA Deck Zim ILCA Deck + Hull For gelcoat used on the hulls of these boats, use SKU 80573...

The ILCA Daggerboard Friction Pad MK2 is screwed to the back of your Daggerboard casing and allows for perfect grip and slip ratio when raising the board. The New and Improved design lets you replace...

Yellow gelcoat in 4oz container for your next boat repair. This is the same gelcoat we use for our C420 with yellow stripes Gelcoat comes waxed and ships without the catalyst (Fire hazard). For best...

Grey gelcoat in 8oz container for your next boat repair. This is the same gelcoat we use for our C420 Deck and the entire Zim ILCA For our C420 hull, you need white C420 Gelcoat Gelcoat comes waxed...

White gelcoat in 8oz container for your next boat repair. This is the same gelcoat we use for our C420 hull and most Zim Optis.  For our C420 deck, you need grey C420 Gelcoat Gelcoat comes...

FJ transom Bar w/ 4 holes

This product gives you all you need to get your ILCA toe strap adjustable on the CL828-68AN cleat

Jib trim reference guide for the C420. Replaces hastily placed electrical tape and provides fast repeatable settings for the jib trimmer. Easily optimize your jib position for every wind condition...

Mast retainer with cleat for the C420. Includes line and cleat.

This clew shackle with block is used to attached your outhaul to the clew of the sail. This is built with a 16mm Harken ball bearing block and a halyard shackle with a removeable pin.

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"