FJ Parts

California style schoolastic version of the CFJ mast. Comes unrigged. Perfect for replacing an old mast if you already have the rigging.

Flying Junior Bottom Cover by Colie Sails Ideal for transporting or storing an FJ on the deck. Reinforced for all deck hardware at the stern as well as heavy duty webbing loops to allow the cover to be laced super taut for flap free highway travel...

Flying Junior Top Cover by Colie Sails - there is no better value in an FJ cover on the planet. Designed for dinghy lot storage only with the boom left attached to mast at the goosenck, it is again, the epitome of a Colie Deluxe. Mast opening features a...

Mast, FJ SCV, unrigged LP Part # 89039

Mast, CFJ CAL SCV, complete LP Part # 18600

Complete rudder for the FJ and the 420E. This is for over transom-style boats. (lines includes). This rudder is not for club 420s. 

Includes the mast, all mounted hardware, shrouds, adjusters, halyards, etc. Ready to step in the boat and sail.

Complete mast for SCV (Scholastic / Collegiate Version) FJ. Includes aluminum mast, spreader bracket, spreaders, masthead casting, mast foot casting, hounds bracket (where shrouds attach), vang bail, gooseneck bracket, lines, and rigging.

CFJ Centerboard 

CFJ Cal JRV Rigged Rudder

CFJ CAL-style rigged rudder. This is a complete rudder including rudder blade, rudder head, and downhaul line.  LP Part # 85151

The CFJ mainsail is a dacron class legal sail manufactured by North Sails. The FJ Main comes complete with sail ties, battens, and a class button, and sail bag.  Zim Sailing now offers FREE NUMBERS and FREE NUMBER INSTALLATION on all sails purchased...

Tiller used for both C420 and FJ  33 inch extension  Horn Cleat attatched to bottom

Club 420 tiller complete with downhaul cleat and 36" extension. Fits PS2000, Vanguard and LP 420's.       

Comes with the tube, ends, wedge and rudder downhaul cleat. Everything but the extension. Fits Vanguard and PS2000 rudder heads.  LP Part # 85207

CFJ rudder blade, white or Grey gelcoat. Plastic bushing in the pivot hole. 

Class approved spinnaker sail for FJ sailboats, made by North Sails. Updated Dark Blue with Light Blue colorway. Class Legal Made by North Sails Zim Part # 20337 / Laser Performance Part # 94502 Compatible with both Zim and Laser Performance boats

CFJ Class Aluminum Tiller (No Extension) LP Part # 85212

Zim Sailing has developed a new aluminum tiller for Cal Style CFJ sailboats that is now class approved! The plastic wedge makes our CFJ tiller compatible with a wide range of rudder heads for CFJs from different builders and different years. Say goodbye...

The Gooseneck Assembly for the Zim 420 and FJ includes the universal joint, the clevis pin, and the hardware for mounting the assembly to the boom.   LP Part # 90490

420 / FJ Tiller With 33" Extension LP Part # 85298

Black mesh spinnaker bag for the Club 420 and Club FJ. Wide opening with support shockcord for easy dousing and launching. Also has a velcro pocket for all your storage needs on race day.   LP Part # 95800

The 4:1 boomvang for the 420/FJ allows control of the sail shape and twist in the sail LP Part # 90605

75mm Rachet Block Harken Part # 2670 LP Part # 91283

CAL Style Rudder Head, fits both Zim and Vanguard CFJ's. Aluminum gudgeons with pressed in bronze bushings.  LP Part # 85134

CFJ jib halyard, 3/32" wire with becket block nico pressed on one and and a snap shackle on the other. Halyard tail is 4mm line with Dyneema core for very low stretch.  LP Part # 90503

Complete Harken 4:1 vang system. Even includes the shackles at both ends. 

FJ Cal Style Rudderhead Plate

 Jib, manufactured by North Sails. Does not include a sail bag. Jib sheets sold separately. LP Part # 94501

Hounds Assembly 420/FJ LP Part # 90510

Club 420 tiller complete with downhaul cleat and 36" extension. Fits some other manufacturer's boats in addition to Zim Club 420s.      

Comes with the tube, ends, wedge and rudder downhaul cleat. Everything but the extension. Fits both Zim 420's and Zim CFJ over the transom tiller rudder heads. LP Part # 85207

Club 420 / CFJ boom. Complete with gooseneck, vang and mainsheet bales, Harken mainsheet blocks, top mounted Harken cheek outhaul block, outhaul line, outhaul cleat and forward lead block to pull outhaul line through cleat.   LP Part # 17650

Tapers from 38mm to 25mm at each end for maximum stiffness in the area of maximum load, but minimum overall weight. Pole has a center eyestrap and is setup for jaws-down use. Zim Applications C420, Club FJ   LP Part # 17675

Rudder head, also compatible with some other builders' boats and tillers. Zim Applications C420 FJ (collegiate, over-the transom-style rudder)  Includes 2:1 rudder downhaul, pivot bolt, and rudder leash.   LP Part # 85133

Replacement side plate for Zim rudder heads  Hole pattern updated in fall 2021. Works with old rudder style. When replacing your rudderhead, order two new side plates to ensure the hole pattern lines up.     Zim Applications  ...

FJ transom Bar w/ 4 holes

Second piece of the tennis ball bailer system used on the 420E and other colegiate boats. Attaches to the single tennis ball bailer to make a double bailer.

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"

Upper pintle for 4 hole mount 420s and FJs. Compatible with some other builders' boats. 

Replacement upper pintle for Cal Style CFJ (through transom rudders only)

Jib halyard shackle with a removeable pin for the C420 and FJ.  Previosuly used SKU#20217  

90 degree rotated 40mm Carbo block for the boom. Low-friction Carbo AirBlocks® are lightweight, strong, reliable—and affordable. These small, compact blocks have very high working loads for safe, easy trimming.  ZIM APPLICATIONS Club...

Replacement lower pintle for Cal Style CFJ (through transom rudders only)

Horn cleat used on the 420 / FJ mast. Also used on collegiate FJ / 420E tillers. LP Part # 91070

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"

Lower pintle for 4 hole mount 420s and FJs. Compatible with some other builders' boats. 

Chute, Bailer, SS60

FJ Shroud (LP)

Ronstan Jib Track

CFJ Jib Car

36" Webbed Hiking Strap

28" Webbed Hiking Strap

CFJ Sailcloth Gasket Set. The sail cloth gasket set is a more durable option for institutional sailing as opposed to individual racing.  This includes two gasket set pieces, each 39 3/8" long, and 2" wide.   

The Top Batten for the CFJ main sail is used with class legal sails from North Sails. This batten is for the adjustable top batten that is held in with velcro, not the top battens that are stitched in.    LP Part # 95875

This 10 pack of 3/16"x 1" stainless clevis pins comes with stainless split rings. These pins are used on the Zim C420 and a number of other small sailboats.  

This 10 pack of 1/4" x 1" stainless clevis pins comes with stainless split rings. These pins are used with the Zim C420 and on a number of small sailboats.  

Complete replacement batten set for the Zim CFJ. LP Part # 95861

Harken Jib Track use for adjusting the position of jib sheeting blocks. It's compatible with Zim part number 20331 "Harken Jib Car Track" and most blocks and jib sheeting hardware Harken Part # 450

Tips for 420/FJ Spreaders to secure the side stay

FJ transom Bar w/ Wider Holes

FJ Mast Step LP Part # 90540

10 pack with  rings.

Stainless rudder retaner clip with molded plastic end. Easier on the fingers. Zim Applications C420, FJ  

FJ Bow Chainplate

Gooseneck Bracket LP Part # 90491

C420/CFJ Hounds bracket LP Part # 90420

CFJ forestay for non west coast boats.   LP Part # 90206

The aftmost piece of the gasket retainer for the Zim Club FJ. Works opposite the front gasket retainer, and in conjunction with the side gasket retainers. 

The front gasket retainer for the Zim CFJ, works in conjunction with 2 side retainers and 1 aft retainer. 

The gasket retainer side piece for the Zim CFJ sailboat holds the mylar gasket in place. To replace both sides you need to order two. Front and aft retainers are sold separately.  

Aluminum back up bar for the shroud chainplate under the rail  LP Part # 91013

A side entry cleat which is quick, efficient and simple to use. LP Part # 91064

Side entry fairlead allows ropes to be hooked in for cleating, yet easily removed.

Vang bail bolted through the mast. Made of stainless steel round bar.  LP Part # 90406

Slot strip gasket set, laminated woven polyester on a rigid nylon backing.   This is two gaskets, they're each 39" long, and 1 3/3" wide.  Also comes with a small strip to install at the front of the centerboard casing.  LP Part # 85049

Mesh bag perfect for storing your wet spinnaker or any other wet gear that needs to dry. ***THIS IS NOT THE BAG FOR MOUNTING TO THE BOAT. THIS IS ONLY FOR STORAGE OFF THE BOAT, TO PREVENT MILDEW FROM FORMING ON WET CLOTH*** For the spinnaker bag that...

This product comes as pictured and doesn't include pins.  1/4" bottom pin, 3/16" upper pins and 3/16" adjustment increment shroud adjuster.  LP Part # 90583

Standard 36" hiking strap from Zim Sailing for the ISCA sailboat and FJ sailboat, made from black webbing with a pad underneath for comfort when hiking hard.  Purchase a single hiking strap if replacing on the ISCA sailboat, or purchase quantity 2...

28" hiking strap, black webbing with a pad underneath for comfort when hiking hard. Sold as a single strap, add 2 to cart for a pair. Zim Applications CFJ : Aft straps Byte Megabyte : Forward/Aft straps   LP Part # 91135

CFJ forestay for west coast, CFJ Class, boats. Image shown is not correct. This forestay has a swage at one end and a nico thimble at the other. Length is 13' 5.5" bearing point to bearing point.  LP Part # 90207

 This replacement shroud for the CFJ can be used with either the east coast or west coast, Cal style, FJ.  LP Part # 90218

Tennis ball style bailer. Shock cord has an 'S' hook crimped on for easy installation. Could be a Penn, Wilson, or Dunlop! LP Part # 91024

Spreader Bracket for C420, CFJ - does not include pins that are in the image.  LP Part # 90003

Harken fiddle block with 22mm sheaves and jam cleat. Used in 3:1 vang systems.   Harken Part # 244 LP Part # 91330

This aluminum transom bar is for use with the Cal style CFJ sailboat. For FJs with the tiller over the transom, order part #20306.  

C420/CFJ Gooseneck U Bracket LP Part # 91052

Aluminum gasket retainer, needs two per boat.  This gasket retainer is 39" long, and 1/2" wide.  LP Part # 85014

Tang C420/CFJ LP Part # 90586

 Strong and durable casting for the heel of your C420/CFJ mast. LP Part # 90559

One pair of spreaders. Includes tip with its pin and ring ding.  LP Part # 90018 * Assembled ItemThis item is assembled or built here at Zim Sailing and may have additional processing time.

Strong and durable casting, that gives you a smooth mainsail hoist every time.  LP Part # 90549

Tiller Extension Re-Grip Kit. 

Used on our tillers to cleat the 2:1 rudder downhaul.  LP Part # 91478

Bridle fits the Zim C420 (Post 2017), LaserPerformance C420, Vanguard C420, PS2000, and Simmons C420. This bridle has been re-designed and offers substancially more adjustibility as well as length.  Our mainsheet bridle with single adjustment finger...

36" Tiller Extension   LP Part # 85194

Spinnaker pole end for a 1 1/4" diameter tube. Same fitting used on our club spinnaker pole. 

33' tiller extension  LP Part # 85193

Machined aluminum rudder gudgeon. Includes plastic bushing pressed in pintle hole (SKU: 30004). Works in both our rudder head and the old style Vanguard.  LP Part # 85060