C420 Parts

This is the Zim Sailing C420 PRO Spinnaker Pole featuring a tapered Super Spars pole with black finish and standard piston ends. Standard on the Zim C420 - PRO boat.  

FAST Canvas covers are handcrafted in the USA, tailor-made to guard your boat and gear against the elements. Tested in the harshest conditions, FAST Canvas covers keep your boat safe while looking good doing it. The C420 Hull Cover is made of black...

FAST Canvas covers are handcrafted in the USA, tailor-made to guard your boat and gear against the elements. Tested in the harshest conditions, FAST Canvas covers keep your boat safe while looking good doing it. The C420 Deck Cover - Mast Up is made...

Complete rigged rudder including rudder head, blade, and downhaul. Zim V2 rudders are only compatible with Zim C420s. To fit on a PS2000, Vanguard, or LP boat you must order the V1 Rudder. Zim 420 rudder blades have a seamless edge that makes for a...

Schoolastic version of the C420 mast. Comes unrigged. Perfect for replacing an old mast if you already have the rigging.

420 Bottom Cover with Drainage Ports from Colie Sails. Best 420 bottom cover on Earth. Features three (3) mesh drains correctly located at the hull's low points for letting out both rainwater and water through the bailer. An access break and heavy...

420 Bottom Cover by Colie Sails.  Ideal for transporting a 420 on the deck. Reinforced for all deck hardware at the stern as well as nine heavy duty webbing loops to allow the cover to be laced super taut for flap free highway travel. Daily use of...

420 Rig Up Top Cover by Colie Sails.  There is no better value in a cover on the planet Designed for dinghy lot storage only with the boom left attached to mast at the goosenck, it is again, the epitome of a Colie Deluxe. Mast opening features a...

420 Colie Deluxe Trailering Top Cover by Colie Sails.  The Colie Deluxe trailering top cover is designed specifically for trailering There is no extra room underneath It fits the deck of the boat perfectly A skirt encloses a preset 1/4 inch bungee,...

Rigged C420 Mast for Zim RACE and PRO Club 420s. This is a complete C420 mast and all of the hardware installed and the spreaders. Plus all standing and running rigging, including halyards, trapeze wires, shrouds, adjusters (with covers), 16:1 vang, with...

Rigged: Spar and all of the hardware installed and the spreaders. Plus all standing and running rigging, including halyards, trapeze wires, shrouds, adjusters (with covers), vang, etc. Ready to step in the boat and sail. **Shipping is not calculated...

Zim 420 centerboards have a seamless edge that makes for a beautifully finished product that is as smooth as possible through the water. Also available in grey.

The Zim Sailing 420 Pro Spare Parts Kit is a great kit for any C420 Sailor who's looking to have everything they need so they don't have to spend time NOT racing. See picture for items in kit. 

Class legal C420 spinnaker. Stars and Stripes.

The Club 420 Mainsail is a class legal dacron sail manufactured by North Sails. The sail comes complete with a class button, tell tales and battens. This sail also includes a North sail bag.   LP Part # 94701

Complete rigged rudder including rudder head, blade, and downhaul. Zim V1 rudders are compatible with some other builders' boats and tillers.    Zim 420 rudder blades have a seamless edge that makes for a beautifully finished product that is as...

Zim 420 centerboards have a seamless edge that makes for a beautifully finished product that is as smooth as possible through the water. Smoke grey centerboards are provided standard with Zim 420s. Also available in white gelcoat.

Unrigged: Includes the spar, mast hardware, and the spreaders. Does not include any standing or running rigging.  **Ships in 1-2 Days. Shipping is not calculated online for this item. We will provide you the delivery cost prior to shipping for your...

The 420 Bunk Dolly is the best available way to store and transport your boat. The dolly has a fiberglass bunk and thick padding to better protect and support the hull of your boat. Tired of your boat slipping while you're...

Zim Sailing offers custom Club 420 spinnakers from North Sails. Chose your panel colors from the 12 different color options as seen in the product image. They can be all different colors, all the same color, or any combination of colors. Get creative and...

 The Club 420 Jib is a class legal dacron jib manufactured by North Sails. The C420 Jib comes standard with a window and tell tales. Jib sheets are sold separately. This sail does not come with a bag. LP Part # 94700

Class legal C420 spinnaker. Available in multiple colorways.   

Tiller used for both C420 and FJ  33 inch extension  Horn Cleat attatched to bottom

The Zim V2 rudder blade has been redesigned and now sweeps further forward in the "down" position. This allows the rudder to be more vertical. V2 Rudder Blades will not work on LP, Vanguard, or PS2000 boats. It will work on any Zim C420. Zim...

New carbon tiller extension from Zim Sailing. Specifically designed with C420 sailors in mind. Much more rigid than a standard aluminum extension and lighter too! Length overall (including cap and universal): 37.5" Carbon Tube Length: 36"' Tube...

Custom made in house by Corey and the Zim rigging team!    Continuous tapered spin sheet made with 7mm FSE Coppa (black/white) with ends tapered to an eye splice. This product includes a soft shackle for attachment to the clew. 

Custom tapered spin sheet made in house by Corey and the Zim rigging team! 7mm Marlow Excel Matrix (Red) with ends tapered and whipped. 

Gasket retainer set for the C420.

420 Boom Travel Bag by Colie Sails Made of Top Gun Just the right length Velcro enclosure Protects your boom and your boat

420 Mast Bag by Colie Sails. This Colie Deluxe mast bag is smoothly tapered at the spreader roots and reinforced at both the hounds and the spreader roots for durability at 75 mph! Every 20 inches below the taper an appropriate length of "de-cored"...

Colie 420 Blade Bag by Colie Sails. The 420 Rudder/Tiller Bag is typical of Colie Deluxe Blade Bags line, constructed of Top Gun and padded with high density Volara® closed cell foam, lined with Dacron® sailcloth and trimmed with the heavy duty...

Vang, ZForce C420

Club 420 tiller complete with downhaul cleat and 36" extension. Fits PS2000, Vanguard and LP 420's.       

Comes with the tube, ends, wedge and rudder downhaul cleat. Everything but the extension. Fits Vanguard and PS2000 rudder heads.  LP Part # 85207

Zim 420 rudder blades have a seamless edge that makes for a beautifully finished product that is as smooth as possible through the water. Also available in grey.  This blade is for any Zim, PS2000, Vanguard, or LaserPerformance C420. Also see our V2...

Electrical Tape Sail Tape (white, 5ft) Drain Plug (4) Shroud Adjuster Tiller Extension Universal 1/4" Clevis Pin w/ Split Ring Pack (10) Split Ring Pack (10) Guy Roller Pin (2) Medium Stopper Ball (2) Gooseneck Universal Gooseneck Clevis Pin (2) Sharpie...

The IYE Super Shute is a lightweight yet robust bailer which offers quick drainage with ease of operation. Manufactured from tough salt-water resistant nylon and ABS plastic, each bailer is boxed with stainless steel fixing nuts, bolts, packing washers,...

Block, 40mm Autoratchet

Our North Sails C420 Top Cover is urethane coated polyester and designed to be used with the mast up. The C420 cover does not go over the boom, but does have tabs for tenting the cover using your main halyard.  Last Chance Item!  

The Gooseneck Assembly for the Zim 420 and FJ includes the universal joint, the clevis pin, and the hardware for mounting the assembly to the boom.   LP Part # 90490

420 / FJ Tiller With 33" Extension LP Part # 85298

C420 Boom, Selden

Black mesh spinnaker bag for the Club 420 and Club FJ. Wide opening with support shockcord for easy dousing and launching. Also has a velcro pocket for all your storage needs on race day.   LP Part # 95800

The 4:1 boomvang for the 420/FJ allows control of the sail shape and twist in the sail LP Part # 90605

Blade bag for rigged rudder and tiller. Has external pocket for sheets, etc. Both hand carry handles and shoulder strap. Velcro closure along long side.  LP Part # 87142

Andersen automatic bailers are recognized by dinghy sailors as the most effective and reliable means of automatic bailing. The Super Medium Bailer is designed for racing dinghies where the bailer is operated from a hiking position, this bailer is mounted...

420 SCV Molded Gasket Retainer - For recessed gaskets only!

Hounds Assembly 420/FJ LP Part # 90510

Club 420 tiller complete with downhaul cleat and 36" extension. Fits some other manufacturer's boats in addition to Zim Club 420s.      

Comes with the tube, ends, wedge and rudder downhaul cleat. Everything but the extension. Fits both Zim 420's and Zim CFJ over the transom tiller rudder heads. LP Part # 85207

The Club 420 Line Kit from Zim Sailing includes a mainsheet, jib sheet, spinnaker sheet and floating bow line. The C420 mainsheet is a 7mm FSE racing sheet in red. The jib sheet is an 8mm FSE dinghy light line in black. The spinnaker sheet is a 7mm...

Club 420 / CFJ boom. Complete with gooseneck, vang and mainsheet bales, Harken mainsheet blocks, top mounted Harken cheek outhaul block, outhaul line, outhaul cleat and forward lead block to pull outhaul line through cleat.   LP Part # 17650

The C420 Link Plate Shroud is an exclusive product designed by Zim Sailing. The end is designed to accept our link plate, which allows you to adjust your rig while keeping the shroud captive, increasing safety and performance. This shroud can be used to...

Club 420 Vang for 16:1 purchase. Lower becket block with shackle with cascade upper system.    LP Part # 90604

The Hyde C420 bottom cover is fabricated from urethane coated polyester, and can only be used with the rig off the boat.  Last Chance Item!

Tapers from 38mm to 25mm at each end for maximum stiffness in the area of maximum load, but minimum overall weight. Pole has a center eyestrap and is setup for jaws-down use. Zim Applications C420, Club FJ   LP Part # 17675

Rudder head, also compatible with some other builders' boats and tillers. Zim Applications C420 FJ (collegiate, over-the transom-style rudder)  Includes 2:1 rudder downhaul, pivot bolt, and rudder leash.   LP Part # 85133

Replacement side plate for Zim rudder heads  Hole pattern updated in fall 2021. Works with old rudder style. When replacing your rudderhead, order two new side plates to ensure the hole pattern lines up.     Zim Applications  ...

Club 420 trapeze wire. Complete with slip knot height adjustable cleat and handle, trapeze harness ring with rolling block. LP Part # 90231

Club 420 Jib Halyard, snap shackle with pull tab, slide down protective cover, becket block and 4mm dyneema core tail. 

All new class legal tapered spin sheets for your club 420. Ideal for use in light air to reduce weight on the spinnaker. 4 mm to 6 mm to 4 mm. This tapered spin sheet has a Technora/Dyneema SK78 core for superior strength.  

Hard anodized aluminum gasket retainer for the Club 420. Sold as set. Screw holes will most likely not line up with your old holes but those are probably stripped anyway, simply fill them with silicone and drill new ones! Each piece is 45 5/8" long and...

Andersen automatic bailers are recognized by dinghy sailors as the most effective and reliable means of automatic bailing. The Super Mini Bailer is designed for racing dinghies where the bailer is operated from a hiking position, this bailer is mounted...

All new class legal tapered spin sheets for your club 420. Ideal for use in light air to reduce weight on the spinnaker. 4 mm to 6 mm to 4 mm. 

Updated C420 spinnaker guy larger roller pin (1/4 inch) in our latest spec. The outboard end of the pin features a 1 inch disc that's better for holding your spin sheets as compared to our previous version. A great upgrade for any C420 sailor! Guy...

Wire Forestay for Club 420's from LP, made from 1/8 in wire. This version is specific to LP C420s. For all Zim C420s or other C420s using the standard 3/32 in wire, please purchase C420 Forestay (Zim)

Available Exclusively at Zim Sailing The new C420 Pro Hiking Strap from Rooster Sailing - a great upgrade for any active racer. These straps are now standard on all Zim PRO C420s and our charter boats. Sold individually. Order 2 to upgrade your C420.

 The bailer guard is designed to protect the Super Shute 60 auto-bailer used in the forward bailer on the Zim C420. Replaces the previous model that is one piece. Having two pieces makes the part lighter and easy to replace. Sold as a Pair.

Jib trim reference guide for the C420. Replaces hastily placed electrical tape and provides fast repeatable settings for the jib trimmer. Easily optimize your jib position for every wind condition.   Use our included installation guide and line...

Plate with sheeve that

Through bolt that attaches shrouds to the hull. Used on collegiate fleet boats   This is the back up bar that fits with this ->   

40' C420 painter

420 mainsheet made from the Rooster Polilite 7mm revolutionary non-twist mainsheet. With the load bearing outer cover gripping the lightweight inner core, the risk of being confronted by a tangled mainsheet on a crucial bear away is greatly reduced...

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"

Upper pintle for 4 hole mount 420s and FJs. Compatible with some other builders' boats. 

Trapeze wire, C420 *wire only*

Jib halyard shackle with a removeable pin for the C420 and FJ.  Previosuly used SKU#20217  

This shroud is designed to fit a LP, Vanguard, or PS2000 boat. 

90 degree rotated 40mm Carbo block for the boom. Low-friction Carbo AirBlocks® are lightweight, strong, reliable—and affordable. These small, compact blocks have very high working loads for safe, easy trimming.  ZIM APPLICATIONS Club...

Selden Mast Step

Horn cleat used on the 420 / FJ mast. Also used on collegiate FJ / 420E tillers. LP Part # 91070

Pintles for Zim 420s and FJs (over-the-transom-rudders).  Hole Spacing: 2" Hole Size: 1/4" Screw Length: 1 1/2"

Lower pintle for 4 hole mount 420s and FJs. Compatible with some other builders' boats. 

SS60 Gasket Thin

Gasket, Inner, Bailer, SS60

Latch, Bailer, SS60

Chute, Bailer, SS60

Pin, Bailer, SS60

The C420 Link Plate is designed by Zim Sailing for use on our Club 420 and ZForce 420 sailboats. The captive design allows you to adjust your rig without fear of the rig crashing down, increasing safety and performance. The primary benefit to our link...

420E Hiking Strap. Webbed hiking strap that will also work on Club 420s.

Gooseneck pin that fits into your boom 

LP Shroud Adjuster

The 20mm stand up block is now standard in the Zim C420 as a lead for the boom vang control line. It makes a great upgrade from the former fairlead and can be used for a number of other applications as well.   

This 10 pack of 3/16"x 1" stainless clevis pins comes with stainless split rings. These pins are used on the Zim C420 and a number of other small sailboats.  

This 10 pack of 1/4" x 1" stainless clevis pins comes with stainless split rings. These pins are used with the Zim C420 and on a number of small sailboats.  

This spinnaker pole end fits a pole with a 1" inside diameter.  

Dacron/Sailcloth Gasket for 420 Centerboard  Comes with two peices that are each 47" long and 1 1/4" wide.  LP Part # 85045